For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
-
Topic author - Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
If the seat for your float valve is rough and you cannot get that #$%& hard red washer to seal, this is what you need. These washers fit, are uniform, and due to being soft, will seal where other commercial washers will not. I am now tooled up and have a small stock in hand. If there is reasonable demand, I will produce on a regular basis, and if not, I will not.
They are available as a minimum order of:
3 washers for $10, which includes postage. Additional washers available at $2 each with the initial order of 3.
Email please, no PM through system. Thank you.
If you have purchased a Full Flow Float Valve from me, please let me know that.
They are available as a minimum order of:
3 washers for $10, which includes postage. Additional washers available at $2 each with the initial order of 3.
Email please, no PM through system. Thank you.
If you have purchased a Full Flow Float Valve from me, please let me know that.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
Topic author - Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Picture of items for sale...note, the valve is for illustration and not part of this ad:
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 5339
- Joined: Sun Jan 06, 2019 11:09 am
- First Name: Henry
- Last Name: Lee
- * REQUIRED* Type and Year of Model Ts owned: Many
- Location: South Pittsburg, TN
- MTFCA Number: 479
- MTFCA Life Member: YES
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Nice Scott! Now I know winters are rough in your neck of the woods, but really, downsizing? LOL!
Have a Good One,
Hank Down Yonder!
Have a Good One,
Hank Down Yonder!
-
- Posts: 5339
- Joined: Sun Jan 06, 2019 11:09 am
- First Name: Henry
- Last Name: Lee
- * REQUIRED* Type and Year of Model Ts owned: Many
- Location: South Pittsburg, TN
- MTFCA Number: 479
- MTFCA Life Member: YES
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Do you need any rain, we are getting nailed again. 10" above by the end of this weekend. I am growing webs in-between my toes.
-
Topic author - Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Hank, yet another one of my get-rich-quick-schemes.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 5339
- Joined: Sun Jan 06, 2019 11:09 am
- First Name: Henry
- Last Name: Lee
- * REQUIRED* Type and Year of Model Ts owned: Many
- Location: South Pittsburg, TN
- MTFCA Number: 479
- MTFCA Life Member: YES
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Sounds like something I would do, but you beat me to the high profit margin and market. Oh well better luck next time. LOL!
Are your figures sore yet and eyes hurting?
Are your figures sore yet and eyes hurting?
-
- Posts: 1285
- Joined: Sun Jan 06, 2019 10:13 pm
- First Name: Donnie
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
- Location: Hills of Arkansas
- MTFCA Number: 49575
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Hi Scott, sent you a e-mail. Ill take 8 washers ... Thanks ......
-
- Posts: 979
- Joined: Mon Jan 07, 2019 5:42 pm
- First Name: Stan
- Last Name: Howe
- * REQUIRED* Type and Year of Model Ts owned: 2
- Location: Helena, MT
- MTFCA Number: 19133
- Board Member Since: 1999
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Great!! I no longer do NH's as I am so buried in other carbs but one of the steps in an nh rebuild is smoothing that area the seat gasket seals against.
I've made quite a few of those gaskets out of lead and they are a pain to make but solve the problem.
Back in time somewhere is a post by me about stealing a wheel weight off your neighbor's Plymouth, beating it flat with a lbbfh and making lead gaskets out of it.
I'll take 3 just because.
I wish you'd buy a laser cutter or a mini cnc mill.
I've made quite a few of those gaskets out of lead and they are a pain to make but solve the problem.
Back in time somewhere is a post by me about stealing a wheel weight off your neighbor's Plymouth, beating it flat with a lbbfh and making lead gaskets out of it.
I'll take 3 just because.
I wish you'd buy a laser cutter or a mini cnc mill.
-
- Posts: 43
- Joined: Tue Jan 08, 2019 5:48 am
- First Name: Tim
- Last Name: Magill
- Location: Bedford In
- MTFCA Number: 4444
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Hi Scott, sent you a e-mail I will take 4 washers. Thanks Tim
-
- Posts: 149
- Joined: Tue Jan 08, 2019 12:19 pm
- First Name: Donald
- Last Name: Goodwin
- * REQUIRED* Type and Year of Model Ts owned: 1924 touring
- Location: Medina Ohio
- Board Member Since: 2018
-
- Posts: 168
- Joined: Mon Jan 28, 2019 4:49 pm
- First Name: Don
- Last Name: Kirtley
- * REQUIRED* Type and Year of Model Ts owned: 13 and 16 touring, 18 and 20 coup, 20 tudor
- Location: Devore, CA
- MTFCA Number: 23703
- MTFCI Number: 23153
- Board Member Since: 2009
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Hi Scott. I’ll take six of the washers if they are available. Thanks Don
-
Topic author - Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Answers to questions being asked:
1. These washers will "squish" and seal imperfect surfaces, where the red fiber ones likely will not, and they will fit any type of float valve sold for any NH carb or Vaporizer carb.
2. If fuel is leaking THROUGH your valve, like fuel running on the floor, Your valve is sticking open and you may need a new valve.
3. If your car leaks annoying drops on the floor overnight, the fuel is likely leaking PAST the valve. This solves that problem
Do you see your order sitting here? Many thanks to the folks who have ordered theirs already. Weather was nice today...so there are lots more in stock now...
1. These washers will "squish" and seal imperfect surfaces, where the red fiber ones likely will not, and they will fit any type of float valve sold for any NH carb or Vaporizer carb.
2. If fuel is leaking THROUGH your valve, like fuel running on the floor, Your valve is sticking open and you may need a new valve.
3. If your car leaks annoying drops on the floor overnight, the fuel is likely leaking PAST the valve. This solves that problem
Do you see your order sitting here? Many thanks to the folks who have ordered theirs already. Weather was nice today...so there are lots more in stock now...
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 59
- Joined: Sun Jan 06, 2019 9:41 pm
- First Name: Roy
- Last Name: Stone
- * REQUIRED* Type and Year of Model Ts owned: 1915 Touring--1925 Tudor
- Location: Poca, W V
- MTFCA Number: 23830
- MTFCI Number: 18986
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Scott a check is in the mail tomorrow.
-
- Posts: 40
- Joined: Sun Jan 06, 2019 11:59 am
- First Name: Paul
- Last Name: Griesse
- * REQUIRED* Type and Year of Model Ts owned: 1912 touring 1924 touring
- Location: Granville Ohio
- MTFCI Number: 19738
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Wonderful! Thanks!! I`ll take 3---where do I send the check ?Paul
-
Topic author - Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
It appears that the blizzard has held up mail, as my "informed delivery" notice shows that I am suddenly receiving a bunch of correspondence regarding these washers as of today. For those that have sent checks, sit tight and remain hopeful! I will be picking them up this afternoon, and sending out a bunch of washers in a day or two. I will personally notify everyone individually when theirs goes out. Many thanks to all who have responded.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
Topic author - Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
To everyone that sent checks: your washers are in the mail today courtesy of my neighbor...thank you Sue!
To Don: your check arrived yesterday and yours should go out in the mail tomorrow
thank you all!
and to everyone else, I have plenty in stock. If you have an NH carb, are rebuilding a NH carb, or rebuild them as a service...you need these. If you do not buy some, if I had children, they would go to bed hungry. At $10 for the first set of 3, and $2 each after that, if you buy some, they would still go to bed hungry. They're cheap. The washers, that is. Not the kids. I don't have any. Kids that is.
To Don: your check arrived yesterday and yours should go out in the mail tomorrow
thank you all!
and to everyone else, I have plenty in stock. If you have an NH carb, are rebuilding a NH carb, or rebuild them as a service...you need these. If you do not buy some, if I had children, they would go to bed hungry. At $10 for the first set of 3, and $2 each after that, if you buy some, they would still go to bed hungry. They're cheap. The washers, that is. Not the kids. I don't have any. Kids that is.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 979
- Joined: Mon Jan 07, 2019 5:42 pm
- First Name: Stan
- Last Name: Howe
- * REQUIRED* Type and Year of Model Ts owned: 2
- Location: Helena, MT
- MTFCA Number: 19133
- Board Member Since: 1999
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Got mine today. Nice. Thanks
-
- Posts: 43
- Joined: Tue Jan 08, 2019 5:48 am
- First Name: Tim
- Last Name: Magill
- Location: Bedford In
- MTFCA Number: 4444
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Hi Scott, just wondering if you got my check, sent it 10 days ago. Thanks Tim
-
Topic author - Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Tim
yours went out with everyone else's two days ago (yes, I got your check). I apologise to everyone for the very slow mail delivery. We had an unusual amount of snow and the melt made our road basically impassible. I can now get off my property with 4 wheel drive and they all went out two days ago.
Very sorry to everyone for the delay
And Don, yours went today as expected
thank you all
yours went out with everyone else's two days ago (yes, I got your check). I apologise to everyone for the very slow mail delivery. We had an unusual amount of snow and the melt made our road basically impassible. I can now get off my property with 4 wheel drive and they all went out two days ago.
Very sorry to everyone for the delay
And Don, yours went today as expected
thank you all
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 43
- Joined: Tue Jan 08, 2019 5:48 am
- First Name: Tim
- Last Name: Magill
- Location: Bedford In
- MTFCA Number: 4444
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
HI Scott, wasn't complaining if that's the way it sounded just making sure it didn't get lost in the mail sorry Tim
-
Topic author - Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Tim
no offense was taken and nothing I posted was meant to be mean or sarcastic or curt. You owe no apology! I reread it and I think I would have taken it's intent exactly as you did and I think I owe you an apology, so I guess we're even...HAHA It's all good.
no offense was taken and nothing I posted was meant to be mean or sarcastic or curt. You owe no apology! I reread it and I think I would have taken it's intent exactly as you did and I think I owe you an apology, so I guess we're even...HAHA It's all good.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 33
- Joined: Mon Jan 07, 2019 9:50 am
- First Name: John
- Last Name: Manuel
- * REQUIRED* Type and Year of Model Ts owned: 1923 RPU
- Location: Lafayette , La.
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Would like to know about the full flow valves and may want the washers. Call me when you have time. 337 852 1125.
John Manuel
John Manuel
-
- Posts: 168
- Joined: Mon Jan 28, 2019 4:49 pm
- First Name: Don
- Last Name: Kirtley
- * REQUIRED* Type and Year of Model Ts owned: 13 and 16 touring, 18 and 20 coup, 20 tudor
- Location: Devore, CA
- MTFCA Number: 23703
- MTFCI Number: 23153
- Board Member Since: 2009
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Recd. washers today. Thanks Scott You didn’t have to go that extra mile. Don
-
- Posts: 4308
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: Steve
- Last Name: Tomaso
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
- Location: Longbranch, WA
- MTFCA Number: 14972
- MTFCI Number: 15411
- Board Member Since: 2001
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Not much to explain - they WORK !!!
Thanks Scott - washers arrived safely !
Thanks Scott - washers arrived safely !
-
- Posts: 43
- Joined: Tue Jan 08, 2019 5:48 am
- First Name: Tim
- Last Name: Magill
- Location: Bedford In
- MTFCA Number: 4444
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
got mine Friday, Thanks Scott Tim
-
- Posts: 796
- Joined: Sun Jan 06, 2019 4:14 pm
- First Name: Joseph
- Last Name: Andulics
- * REQUIRED* Type and Year of Model Ts owned: 1926 Fordor, 1926 Truck, 1927 Roadster GOW, RAJO Sprint car
- Location: North Ridgeville, OH
- MTFCA Number: 9766
- Contact:
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Got mine, look great, thanks Scott. Does anyone make a soft lead washer for the the NH drain valve (6205)? I had some at one time but I've used them all up over the years. Liked the way they sealed the against the steel float bowl.
-
Topic author - Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Joe
I am unaware of anyone who makes that gasket out of lead. If there was sufficient demand, I'd make them, but I doubt there is...
I am unaware of anyone who makes that gasket out of lead. If there was sufficient demand, I'd make them, but I doubt there is...
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
Topic author - Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: For Sale: FINALLY! - Soft Lead Washers for NH Carburetors!
Daniel and John
I missed the mail this afternoon, so yours will go out Monday.
I missed the mail this afternoon, so yours will go out Monday.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured